首页 工具
登录
购物车
Niraparib

Niraparib

产品编号 T3231   CAS 1038915-60-4
别名: 尼拉帕尼, MK-4827

Niraparib (MK-4827) 是一种 PARP 抑制剂,可以抑制 PARP1 和 PARP2 (IC50=3.8/2.1 nM),具有选择性。Niraparib 具有抗肿瘤活性,可以抑制 DNA 损伤修复、诱导细胞凋亡

TargetMol的所有产品和服务仅用于科学研究,不能被用于人体,我们也不向个人提供产品和服务。
Niraparib Chemical Structure
Niraparib, CAS 1038915-60-4
规格 价格/CNY 货期 数量
1 mg ¥ 223 现货
5 mg ¥ 513 现货
10 mg ¥ 739 现货
25 mg ¥ 1,130 现货
50 mg ¥ 1,580 现货
100 mg ¥ 2,350 现货
200 mg ¥ 3,480 现货
500 mg ¥ 5,290 现货
1 mL * 10 mM (in DMSO) ¥ 563 现货
产品目录号及名称: Niraparib (T3231)
点击图片重新获取验证码
选择批次  
纯度: 99.91%
纯度: 99.85%
纯度: 99.48%
纯度: 98%
纯度: 98%
更多批次查询请联系客服
生物活性
化学信息
存储 & 溶解度
参考文献
产品描述 Niraparib (MK-4827) is a PARP inhibitor that selectively inhibits PARP1 and PARP2 (IC50=3.8/2.1 nM). Niraparib has antitumor activity, inhibits DNA damage repair, and induces apoptosis.
靶点活性 PARP2:2.1 nM, PARP1:3.8 nM
体外活性 方法:PDAC 细胞系 MIA-PaCa-2、PANC-1、Capan-1 和 OvCa 细胞系 OVCAR8、PEO1 用 Niraparib (0.1-200 µM) 处理 48 h,使用 CellTiter-Glo Luminescent Cell Viability Assay 检测细胞活力。
结果:Niraparib 对 MIA-PaCa-2、PANC-1、Capan-1、OVCAR8、PEO1 细胞的 IC50 分别为 26 µm、50 µm、15 µM、20 µM 和 28 µM。[1]
方法:卵巢癌细胞 SKOV3 和 UWB1.289 用 Niraparib (0.5-15 µM) 处理 48 h,使用 Western Blot 方法检测靶点蛋白表达水平。
结果:Niraparib 上调了 SKOV3 和 UWB1.289 细胞中 PD-L1 的表达。[2]
体内活性 方法:为检测体内抗肿瘤活性,将 Niraparib (25 mg/kg,口服给药,每周四次) 和 PD-L1 (10mg/kg,腹腔注射,每周两次) 给药给携带卵巢癌肿瘤 ID8 的 C57BL/6 小鼠,持续八周。
结果:Niraparib 在体内上调卵巢肿瘤的 PD-L1 表达,并与 PD-L1 阻断具有协同作用。[2]
方法:为检测体内抗肿瘤活性,将 Niraparib (50 mg/kg,0.5% methylcellulose) 灌胃给药给携带颅内人源性 TNBC 细胞系 SUM149、MDA-MB-231Br 或 MDA-MB-436 的 C57BL/6 小鼠,每天一次,持续两周。
结果:在 BRCA 突变型 MDA-MB-436 模型中,Niraparib 增加中位生存期和减少肿瘤负荷。但在 BRCA 突变型 SUM149 或 BRCA 野生型 MDA-MB-231Br 模型中不增加,尽管颅内肿瘤中存在高浓度。[3]
激酶实验 Enzyme assay is conducted in buffer containing 25 mM Tris, pH 8.0, 1 mM DTT, 1 mM spermine, 50 mM KCl, 0.01% Nonidet P-40, and 1 mM MgCl2. PARP reaction contains 0.1 μCi [3H]NAD+ (200?000 DPM), 1.5 μM NAD+, 150 nM biotinylated NAD+, 1 μg/mL activated calf thymus, and 1?5 nM PARP-1. Autoreactions utilizing SPA bead-based detection are carried out in 50 μL volumes in white 96-well plates. Compounds (e.g., MK-4827) are prepared in 11-point serial dilution in 96-well plate, 5 μL/well in 5% DMSO/Water (10× concentrated). Reactions are initiated by adding first 35 μL of PARP-1 enzyme in buffer and incubating for 5 min at room temperature and then 10 μL of NAD+ and DNA substrate mixture. After 3 h at room temperature, these reactions are terminated by the addition of 50 μL of streptavidin-SPA beads (2.5 mg/mL in 200 mM EDTA, pH 8). After 5 min, they are counted using a TopCount microplate scintillation counter. IC50 data is determined from inhibition curves at various substrate concentrations[1].
细胞实验 Proliferation assays were conducted in 96-well black viewplates, and 300 cells/well (250 cell/well for BRCA-1 wt) in culture medium, 190 μL/well (DMEM containing 10% FCS, 0.1 mg/mL penicillin-streptomycin, and 2 mM L-glutamine), were plated and incubated for 4 h at 37℃ under 5% CO2 atmosphere. Inhibitors were then added with serial dilutions, 10 μL/well to obtain the desired final compound concentration in 0.5% DMSO. The cells were then incubated for 7 days at 37℃ in 5% CO2 after which time viability was assessed. Briefly, with CellTiter-Blue solution prediluted 1:10 in medium, 100 μL/well was added and the cells left for 45 min at 37℃ under 5% CO2 and then a further 15 min at room temperature in the dark. The number of living cells was determined by reading the plate at fluorimeter, excitation at 550 nm and emission at 590 nm. Cell growth was expressed as the percentage growth with respect to vehicle treated cells. The concentration required to inhibit cell growth by 50% (CC50) was determined.(Only for Reference)
别名 尼拉帕尼, MK-4827
分子量 320.39
分子式 C19H20N4O
CAS No. 1038915-60-4

存储

Powder: -20°C for 3 years | In solvent: -80°C for 1 year

溶解度

Ethanol: 60 mg/mL (187.3 mM)

H2O: < 1 mg/mL (insoluble or slightly soluble)

DMSO: 60 mg/mL (187.3 mM)

溶液配制表

可选溶剂 浓度 体积 质量 1 mg 5 mg 10 mg 25 mg
Ethanol / DMSO 1 mM 3.1212 mL 15.606 mL 31.212 mL 78.0299 mL
5 mM 0.6242 mL 3.1212 mL 6.2424 mL 15.606 mL
10 mM 0.3121 mL 1.5606 mL 3.1212 mL 7.803 mL
20 mM 0.1561 mL 0.7803 mL 1.5606 mL 3.9015 mL
50 mM 0.0624 mL 0.3121 mL 0.6242 mL 1.5606 mL
100 mM 0.0312 mL 0.1561 mL 0.3121 mL 0.7803 mL

TargetMol Calculator计算器

摩尔浓度计算器
稀释计算器
配液计算器
分子量计算器
=
X
X
X
=
X
=
/
g/mol

输入分子式,点击计算,可计算出产品的分子量。

TargetMol Library Books参考文献

1. Zhao Q, et al. Niraparib-induced STAT3 inhibition increases its antitumor effects. Front Oncol. 2022 Oct 17;12:966492. 2. Meng J, et al. Niraparib exhibits a synergistic anti-tumor effect with PD-L1 blockade by inducing an immune response in ovarian cancer. J Transl Med. 2021 Oct 7;19(1):415. 3. Sambade MJ, et al. Efficacy and pharmacodynamics of niraparib in BRCA-mutant and wild-type intracranial triple-negative breast cancer murine models. Neurooncol Adv. 2019 Jun 4;1(1):vdz005.
LCS3 Mitotane OsMundacetone Simvastatin Mardepodect hydrochloride Pyroxamide GSK2256098 Edaravone

相关化合物库

该产品包含在如下化合物库中:
抗癌上市药物库 抗癌活性化合物库 高选择性抑制剂库 抗癌临床化合物库 药物功能重定位化合物库 抗癌药物库 抑制剂库 EMA 上市药物库 已知活性化合物库 抗乳腺癌化合物库

TargetMol Calculator剂量换算

对于不同动物的给药剂量换算,您也可以参考 更多...

TargetMol Calculator 体内实验配液计算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法: 比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL,一共给药动物10 只,您使用的配方为5% DMSO+30% PEG300+5% Tween 80+60% ddH2O。那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 50 μL DMSO (母液浓度为 40 mg/mL), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法:取 50 μL DMSO 主液,加入 300 μL PEG300, 混匀澄清,再加 50 μL Tween 80,混匀澄清,再加 600 μL ddH2O, 混匀澄清。

第一步:请输入动物实验的基本信息
剂量
mg/kg
每只动物体重
g
给药体积
μL
动物数量
第二步:请输入动物体内配方组成,不同的产品配方组成不同,如有配方需求,可先联系我们提供正确的体内配方。
% DMSO
%
% Tween 80
% ddH2O
计算 重置

技术支持

您可能有的问题的答案可以在抑制剂处理说明中找到,包括如何准备库存溶液,如何存储产品,以及基于细胞的分析和动物实验需要特别注意的问题。

Keywords

Niraparib 1038915-60-4 Apoptosis Chromatin/Epigenetic DNA Damage/DNA Repair Others PARP breast 尼拉帕尼 DNA damage inhibit cancer anti-tumor poly ADP ribose polymerase bioavailable MK-4827 orally Inhibitor lung ovarian MK4827 MK 4827 inhibitor

 

TargetMol Loading
陶术
生物
TargetMol®中国区唯一合作伙伴
点击进入陶术生物官网陶术生物
联系我们
400-820-0310

上海市静安区江场三路238号8楼